Rules for safe operation of CNC grinder
Column:Industry News Time:2018-09-05
When the grinding wheel is installed, the movement is lighter, especially the new grinding wheel. After installation, the idling test should be carried out for 10 minutes.

The main contents of safe operation procedures are:

1. When the grinding wheel is installed, the movement is lighter, especially the new grinding wheel. After installation, the idling test should be carried out for 10 minutes. Observe whether there is any deflection, vibration and other phenomena. No problem before starting use.

2. Keep the machine clean and tidy. Check the position of the handle and travel limit block before driving.

3. When the grinding wheel is very close to the workpiece, it is necessary to change the way of hand rolling and observe whether the workpiece has protrusion or depression.

4. When the CNC grinding wheel has not stopped completely, can not clean up the coolant, or grinding, replacement and other work.

5, flat grinding wheel, the maximum extension can not exceed 25 mm, grinding wheel block should be kept parallel.

6. If there are burrs on the workpiece, remove it before machining, so as not to affect the machining effect.

7, the choice of coolant should be appropriate so as not to cause problems and affect the cooling effect.

8. If the wheel is not sharp, it can be repaired with diamond.

现在学建筑赚钱吗 河北福彩快三开奖结果 配资网上上盈靠谱 辽宁11选五开奖结果前三组 秒速时时彩怎么才能赢 pk10赛车345678方案 山西十一选五投注网站 白小姐四肖精选期期准 在线杠杆配资肆卓信宝配资 河南快三开奖预测 北京快8开奖号码